It can diagnose the electric control system of Volkswagen Audi Seat Skoda series, including powertrain, chassis, body information, air conditioning and other systems. The functions, menus and operation steps are the same as the original decoder. It also has the special functions of VW Audi SEAT SKODA, including oil reset/ EPB reset/ DPF/ BAT matching/ SAS/ throttle matching/ suspension/ light adjustment. For other brands of obd2 cars, it can read and erase engine fault codes and turn off the engine fault indicator.

Covers all systems of VAG vehicles

1. Engine System
Quickly determines the cause of engine system failures and turns off warning lights. It also retrieves current, permanent and pending codes in the vehicle's engine system
2. ABS
You know it's serious when you see the ABS (Anti-lock Brake System) light come on. Simply plug the unit into your 16-pin port (usually under the steering wheel) and use it to identify what's wrong. You can determine the cause of the error: low brake fluid, blown fuse or abnormal signal from the wheel sensor.
3. SRS (Safety Restraint System)
When the SRS (Safety Restraint System) light comes on, it indicates that the airbag control unit has found a problem with the system. You can use the KW350 to check the SRS system for faults and fix them. It is very important that the airbag is always working properly.
4. Transmission System
If you find the following: transmission slippage, rough shifts, delayed engagement, oil leaks or transmission warnings, then your car may need to be serviced. You can use the KW350 to perform a series of diagnostics and identify problem areas for repair.
5. SAS
The Steering Angle Sensor (SAS) is a key part of the ESC system that measures the steering wheel position angle and steering rate.SAS is important for the safety of both the driver and passengers. When the SAS light is on, you can use the KW350 to read the error code. Once the problem is resolved, you can use the KW350 to recalibrate and clear the codes.
6. ESP System
The Electronic Stability Program (also known as Electronic Stability Control) improves vehicle stability by detecting and reducing traction loss (slippage). When ESP detects a loss of steering control, check the ESP light and read the code before you take any action. It can help you minimize potential damage, whether it is monetary loss or loss of human life. 7.
7. Retrieve VIN information, etc... (supports up to 108 VAG vehicle systems)

Professional 9 VAG vehicle-specific features

1. Oil Reset Service.
Allows you to reset the engine oil life system, which calculates the optimal oil life change interval based on vehicle driving conditions and climate.
2. EPB Service.
Helps to maintain the electronic brake system safely and effectively, deactivate and activate the brake control system, auxiliary brake fluid control, open and close the brake pads, set the brakes after replacing the discs or pads, etc.
3.DPF Service.
Allows you to perform a variety of functions on the DPF system. TPMS Service: Allows you to quickly locate the tire sensor ID from the vehicle's ECU, as well as perform TPMS programming and reset procedures after replacing a tire sensor.
4. BAT Service.
Allows the scan tool to evaluate battery charge status, monitor closed circuit current, register battery changes and activate the vehicle's stationary state.
5. SAS Steering Angle Sensor Service.
Helps clear faulty steering angle sensor memory and plays an important role in steering angle sensor calibration.
6. Injector Coding
Misses injectors and some dead injectors even if injectors are disabled. Other problems with the ignition system and mechanical components may also not show RPM loss when the injectors are off
7. TPS Throttle Adaptation
The throttle body is a tube containing a rotatable plane (butterfly) that controls the amount of air entering the engine. In electronic fuel injection vehicles, the throttle position sensor and air flow sensor communicate with a computer, which provides the appropriate amount of fuel needed for the injectors. The throttle sensor position must be relearned after cleaning or repair
8. Suspension 9.9.
Light Adjustment

Convair KW450 all features compatible with Volkswagen Audi Skoda and Seat models

Volkswagen
for VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg).
For Audi (A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6).
Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb).
For seats (leon, Ateca, Ibize, Altea, Cushion, Cord, Alhambra).
Lamborghini (URUS 2018-2019 ,Gallardo 2008-2014 , Gallardo NF / Huracan 2014-2018 , Aventador 2012-2018)
Bugatti: (Veyron 2001-2016 , Chiron 2017-2019)

Supports full OBDII functionality for all OBD2 certified vehicles

1. Retrieve generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
2. Easily determine the cause of the Malfunction Indicator Light (MIL)
3. Turn off the Malfunction Indicator Light (MIL), clear the code and reset the display
4. Display the DTC definition on the TFT screen without online checking.
5. View the freeze frame data stored on the on-board computer board.
6. Display monitor and I/M readiness status (emission related)
7. Reads real-time PCM data streams and displays them in text mode and graphical mode.
8. Retrieve vehicle information (VIN, CIN and CVN)
9. Supports 10 diagnostic modes including O2 sensor test, EVAP test and component test.

Packing list

1* KONNWEI KW450 VAG Scanner
1* Mini USB data cable
1* User manual
1* Nylon bag
1* Carton packing