This Digital Clamp Meter is designed for use in laboratories, field services, home use, and in any circumstances where measurement of a high current is required.

● Non-contact AC voltage detection
● Bar graph, measurement unit indication, and backlight
● Sampling rate of about 3 times/sec
● Automatic polarity indication
● Autorange mode
● Data Hold mode
● Relative mode
● MIN MAX mode
● True-RMS measurement
● Full-range overload protection
● Low power consumption
● CATIII 1000V

• AC Voltage: 6V/60V/600V/750V
  

• DC Voltage: 6V/60V/600V/1000V
  

• DC Current: 60A/600A/1000A
  

• AC Current: 60A/600A/1000A
  

• Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
  

• Frequency(with the clamp): 40.00Hz - 99.99Hz/100.0Hz - 999.9Hz

• Frequency(with Test Leads): 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHzDuty Cycle: 5% ~ 95%
  

• Capacitance (use Relative mode): 40.00nF/400.0nF/4.000μF/40.00μF/400.0μF/4000μF
  

• Diode Test: The approximate forward voltage drop of the diode will be displayed.
  

• Continuity Test: The built-in buzzer will sound if the resistance is less than about 20Ω.
  

• Temperature: -20°C~0°C/0°C~400°C/400°C~1000°C, -4°F~32°F/32°F~752°F/752°F~1832°F