2pcs Heavy Duty MacPherson Strut Coil Spring Compressor

Setup is fast and simple.

Compression is achieved by alternating from one assembly to another. Each device has a heat-treated alloy thrust screw with forged hooks.

1. Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression.
2. Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools.
3. Constructed with forged hooks and center screw hardened for maximum strength and longevity.
4. Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge.

Instructions:

1. lubricate both main shafts with oil.
2. Align the hooks with the safety pins backed off so the hooks will fit over the spring
3. Position both set of hooks 180° a part, opposite each other.
4. Push safety pins in the lock position on hooks.
5. Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge.