Quantity
ltem No.
1, Two test methods, Accurate Test ( CCA/DIN/IEC/EN/JIS required ) and Quick Test ( Ah required )are available for test (DY219/DY219A).
2, Four tester fully diagnose battery status and electrical system of the car.
3, Battery conclusion upon rich parameters measured.
4, Wrong-polarity-protected,overload voltage protected.
Battery Test | Yes |
Engine Start-up Load Test | Yes |
Maximum Load Test | Yes |
Charging System Test | Yes |
CCA Range | 100~1700 |
IEC Range | 100~1000 |
EN Range | 100~1700 |
DIN Range | 100~1000 |
JIS Range | Reference table in manual |
Displays Battery Internal Resistance | Display ohm |
Displays Battery Condition | Good/OK/Pay attention/Replace |
Test 12V Batteries | Yes |
Test 12V/24V Batteries | No |
Battery Recharge Indicator | Yes |
Reverse Polarity Protection | Yes |
Detects and Displays Bad cell | Yes |
Loose Lead Detection | Yes |
Internal Unit Conversion ENEICDIN | Yes |
Overload protection of input voltage | Yes |
Cable Length | 700mm |
Dimension | 180*90*32mm |
Weight | 400 |
Display Battery Status of Health(SOH) | Yes |